Ski Sharpening Tools

Stay connected in the wind. This forum is for anyone who rides the wind, winter or summer, on whatever board suits their fancy. Share the stoke, find out where people are going, ask any question, share your discoveries, and discuss any esoteric idea you may have related to the pursuit of wind. Please keep it positive.

Moderator: MK

Post Reply
SeaBoo
Posts: 92
Joined: Thu Feb 01, 2007 5:17 pm
Location: Red Wing MN
Contact:

Ski Sharpening Tools

Post by SeaBoo »

I need my skis sharpened and the price at my ski hill went up...way up. I checked online to see about buying the tools myself but I find there's alot of choices out there. I remember reading last winter that some people on this board sharpen their skis themselves. What works best? I'm looking for something easy and reasonable. Thanks!
Nora
faceplant
Posts: 39
Joined: Sun Dec 17, 2006 10:38 am
Location: St. Paul, MN
Contact:

Post by faceplant »

Hey Nora -

I used to tune my own skiis (back when I was ambitious). I haven't for a few years now, but I still have my ski vise if you want it. It's in really good shape and its just sitting around collecting dust.... Let me know!

Bryan
SeaBoo
Posts: 92
Joined: Thu Feb 01, 2007 5:17 pm
Location: Red Wing MN
Contact:

Post by SeaBoo »

Hi Bryan,
Sure if you don't want it. Thanks!!! Do you want to kite Pepin tomorrow? Pete?? I'll be free all day let me know!
Nora
steveb
Posts: 2146
Joined: Wed Nov 27, 2002 3:31 pm
Location: sblain@frontiernet.net

Post by steveb »

Really there's not much you need.
1 An old iron. used to melt the wax onto the skis and spread it out
2. Scraper, used to remove wax. You're actually forcing wax into the base material when you scrape.
3. Scotch brite pad to buff the scraped base.
4. Edge sharpening file. Usually about $40 most ski shops will have them and show you how to use it.
Something to put the skis on when you do it.

If you don't have a clue what you're doing, get the stuff and I'll show you how to use it all.
Regional Ozone Team rider
SeaBoo
Posts: 92
Joined: Thu Feb 01, 2007 5:17 pm
Location: Red Wing MN
Contact:

Post by SeaBoo »

Thanks Steve! I don't have a clue but I'm willing to learn. I've been at Welch and have noticed my skis don't have the bite they need this year...also with kiting when I hit ice I can't get a good edge. I figure they need to be sharpened.
Nora
EASPeter
Posts: 4
Joined: Sat Oct 06, 2007 5:05 pm
Location: Minnetonka
Contact:

Post by EASPeter »

Hey I know Dakine makes a tune kit with iron,edge sharpener,scraper,wax,and I cant exactly remember what else it includes but its a nice thing to have if your thinking of doing your own tunes. I work at Extreme Action Sports in Minnetonka and I have a Dakine account so I could order it for you give me a call if your interested.
Peter
ExtremeActionSports
4336 Shady Oak Road
Minnetonka, MN 55343
http://www.extremeairstore.com
(952)933-2247
SeaBoo
Posts: 92
Joined: Thu Feb 01, 2007 5:17 pm
Location: Red Wing MN
Contact:

Post by SeaBoo »

Hi Peter,
I've been wanting to check out your store but I'm about an hour+ out of town. For waxing I've been using Swix Glidewax in a can. It's apply, dry buff and go. It doesn't get much easier than that and works great. All the information on line about sharpening is pretty confusing as it ranges from pocket sharpeners to expensive complex set ups. I'm looking for info on which is easy yet still effective to use. I'll be up at Swede on Sat afternoon...hopefully I can talk to you then. Thanks for the reply!
BTW I'm down here by Lake Pepin and it was fantastic yesterday. The ice is as smooth as can be and covered with about 3 to 4 inches of fluffy snow...no slush or tracks of any kind :D Other than ours! The wind had blown off the early snow so the Lake froze over good and the last snow is just sitting on it. Not bonded but my skis did well yesterday.
Post Reply